dmesg - first disk test
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-25-generic (buildd@roseapple) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #38-Ubuntu SMP Mon Feb 18 23:28:26 UTC 2013 (Ubuntu 3.5.0-25.38-generic 3.5.7.4)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001bfeffff] usable
BIOS-e820: [mem 0x000000001bff0000-0x000000001bff2fff] ACPI NVS
BIOS-e820: [mem 0x000000001bff3000-0x000000001bffffff] ACPI data
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
DMI 2.4 present.
DMI: HP Pavilion 061 PX531AA-UUZ t3010.ch/Salmon , BIOS 3.10 03/09/2005
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x1bff0 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FFE0000000 write-back
1 base 001C000000 mask FFFC000000 uncachable
2 base 00E8000000 mask FFFC000000 write-combining
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [mem 0x000f6430-0x000f643f] mapped at [c00f6430]
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: [mem 0x00000000-0x1bfeffff]
[mem 0x00000000-0x001fffff] page 4k
[mem 0x00200000-0x1bdfffff] page 2M
[mem 0x1be00000-0x1bfeffff] page 4k
kernel direct mapping tables up to 0x1bfeffff @ [mem 0x01ffa000-0x01ffffff]
RAMDISK: [mem 0x19e9f000-0x1ad01fff]
ACPI: RSDP 000f7e70 00014 (v00 AWARD )
ACPI: RSDT 1bff3040 0002C (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 1bff30c0 00074 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
ACPI: DSDT 1bff3180 0418C (v01 AWARD AWRDACPI 00001000 MSFT 0100000E)
ACPI: FACS 1bff0000 00040
ACPI: APIC 1bff7380 0005A (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
ACPI: Local APIC address 0xfee00000
0MB HIGHMEM available.
447MB LOWMEM available.
mapped low ram: 0 - 1bff0000
low ram: 0 - 1bff0000
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
Normal [mem 0x01000000-0x1bfeffff]
HighMem empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009efff]
node 0: [mem 0x00100000-0x1bfeffff]
On node 0 totalpages: 114559
free_area_init_node: node 0, pgdat c18a4940, node_mem_map dbc6f200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 864 pages used for memmap
Normal zone: 109712 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
e820: [mem 0x1c000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @dbc5d000 s34176 r0 d23168 u57344
pcpu-alloc: s34176 r0 d23168 u57344 alloc=14*4096
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113663
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
__ex_table already sorted, skipping sort
Initializing CPU#0
allocated 917248 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00000000:00000000)
Memory: 427920k/458688k available (5967k kernel code, 30316k reserved, 2934k data, 756k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xdc7f0000 - 0xffbfe000 ( 564 MB)
lowmem : 0xc0000000 - 0xdbff0000 ( 447 MB)
.init : 0xc18b2000 - 0xc196f000 ( 756 kB)
.data : 0xc15d3de4 - 0xc18b1800 (2934 kB)
.text : 0xc1000000 - 0xc15d3de4 (5967 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:2304 nr_irqs:256 16
CPU 0 irqstacks, hard=db408000 soft=db40a000
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 1808.474 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3616.94 BogoMIPS (lpj=7233896)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
mce: CPU supports 5 MCE banks
SMP alternatives: switching to UP code
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20120320
ftrace: allocating 24614 entries in 49 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Sempron(tm) Processor 3100+ stepping 00
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Brought up 1 CPUs
Total of 1 processors activated (3616.94 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x1bff0000-0x1bff2fff] (12288 bytes)
dummy:
RTC time: 15:24:09, date: 02/26/13
NET: Registered protocol family 16
EISA bus registered
node 0 link 0: io port [1000, fffff]
TOM: 0000000020000000 aka 512M
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [20000000, ffffffff]
bus: [00, ff] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0x20000000-0xfcffffffff]
ACPI: bus type pci registered
PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
PCI: PCI BIOS revision 2.10 entry at 0xf2550, last bus=1
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Actual Package length (6) is larger than NumElements field (1), truncated
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x047f] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0490-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0x0fff] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x1100-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x20000000-0xfebfffff] (ignored)
PCI: root bus 00: hardware-probed resources
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x20000000-0xfcffffffff]
pci 0000:00:00.0: [1039:0760] type 00 class 0x060000
pci 0000:00:00.0: reg 10: [mem 0xe8000000-0xebffffff]
pci 0000:00:01.0: [1039:0002] type 01 class 0x060400
pci 0000:00:02.0: [1039:0964] type 00 class 0x060100
pci 0000:00:02.5: [1039:5513] type 00 class 0x010180
pci 0000:00:02.5: reg 20: [io 0x4000-0x400f]
pci 0000:00:02.7: [1039:7012] type 00 class 0x040100
pci 0000:00:02.7: reg 10: [io 0xa000-0xa0ff]
pci 0000:00:02.7: reg 14: [io 0xa400-0xa47f]
pci 0000:00:02.7: supports D1 D2
pci 0000:00:02.7: PME# supported from D3hot D3cold
pci 0000:00:03.0: [1039:7001] type 00 class 0x0c0310
pci 0000:00:03.0: reg 10: [mem 0xed107000-0xed107fff]
pci 0000:00:03.1: [1039:7001] type 00 class 0x0c0310
pci 0000:00:03.1: reg 10: [mem 0xed108000-0xed108fff]
pci 0000:00:03.2: [1039:7001] type 00 class 0x0c0310
pci 0000:00:03.2: reg 10: [mem 0xed104000-0xed104fff]
pci 0000:00:03.3: [1039:7002] type 00 class 0x0c0320
pci 0000:00:03.3: reg 10: [mem 0xed105000-0xed105fff]
pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1039:0900] type 00 class 0x020000
pci 0000:00:04.0: reg 10: [io 0xa800-0xa8ff]
pci 0000:00:04.0: reg 14: [mem 0xed106000-0xed106fff]
pci 0000:00:04.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:05.0: [1039:0180] type 00 class 0x010185
pci 0000:00:05.0: reg 10: [io 0xac00-0xac07]
pci 0000:00:05.0: reg 14: [io 0xb000-0xb003]
pci 0000:00:05.0: reg 18: [io 0xb400-0xb407]
pci 0000:00:05.0: reg 1c: [io 0xb800-0xb803]
pci 0000:00:05.0: reg 20: [io 0xbc00-0xbc0f]
pci 0000:00:05.0: reg 24: [io 0xc000-0xc07f]
pci 0000:00:05.0: PME# supported from D3cold
pci 0000:00:0a.0: [1186:4c00] type 00 class 0x020000
pci 0000:00:0a.0: reg 10: [mem 0xed100000-0xed103fff]
pci 0000:00:0a.0: reg 14: [io 0xc400-0xc4ff]
pci 0000:00:0a.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:0a.0: supports D1 D2
pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: [1106:3044] type 00 class 0x0c0010
pci 0000:00:0b.0: reg 10: [mem 0xed109000-0xed1097ff]
pci 0000:00:0b.0: reg 14: [io 0xc800-0xc87f]
pci 0000:00:0b.0: supports D2
pci 0000:00:0b.0: PME# supported from D2 D3hot D3cold
pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
pci 0000:01:00.0: [1039:6330] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xe7ffffff pref]
pci 0000:01:00.0: reg 14: [mem 0xed000000-0xed01ffff]
pci 0000:01:00.0: reg 18: [io 0x9000-0x907f]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:01.0: bridge window [mem 0xed000000-0xed0fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe7ffffff pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
e820: reserve RAM buffer [mem 0x1bff0000-0x1bffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [mem 0x000f0000-0x000f3fff]
pnp 00:00: [mem 0x000f4000-0x000f7fff]
pnp 00:00: [mem 0x000f8000-0x000fbfff]
pnp 00:00: [mem 0x000fc000-0x000fffff]
pnp 00:00: [mem 0x1bff0000-0x1bffffff]
pnp 00:00: [mem 0xffff0000-0xffffffff]
pnp 00:00: [mem 0x00000000-0x0009ffff]
pnp 00:00: [mem 0x00100000-0x1bfeffff]
pnp 00:00: [mem 0x1c000000-0x1fffffff]
pnp 00:00: [mem 0xffee0000-0xffefffff]
pnp 00:00: [mem 0xfffe0000-0xfffeffff]
pnp 00:00: [mem 0xfec00000-0xfecfffff]
pnp 00:00: [mem 0xfee00000-0xfeefffff]
system 00:00: [mem 0x000f0000-0x000f3fff] could not be reserved
system 00:00: [mem 0x000f4000-0x000f7fff] could not be reserved
system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:00: [mem 0x1bff0000-0x1bffffff] could not be reserved
system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x00100000-0x1bfeffff] could not be reserved
system 00:00: [mem 0x1c000000-0x1fffffff] has been reserved
system 00:00: [mem 0xffee0000-0xffefffff] has been reserved
system 00:00: [mem 0xfffe0000-0xfffeffff] has been reserved
system 00:00: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [bus 00-ff]
pnp 00:01: [io 0x0cf8-0x0cff]
pnp 00:01: [io 0x0000-0x047f window]
pnp 00:01: [io 0x0480-0x048f]
pnp 00:01: [io 0x0490-0x0cf7 window]
pnp 00:01: [io 0x0d00-0x0fff window]
pnp 00:01: [io 0x1000-0x10df]
pnp 00:01: [io 0x10e0-0x10ff]
pnp 00:01: [io 0x1100-0xffff window]
pnp 00:01: [mem 0x000a0000-0x000bffff window]
pnp 00:01: [mem 0x20000000-0xfebfffff window]
pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:02: [io 0x0010-0x001f]
pnp 00:02: [io 0x0022-0x003f]
pnp 00:02: [io 0x0044-0x005f]
pnp 00:02: [io 0x0062-0x0063]
pnp 00:02: [io 0x0065-0x006f]
pnp 00:02: [io 0x0074-0x007f]
pnp 00:02: [io 0x0091-0x0093]
pnp 00:02: [io 0x00a2-0x00bf]
pnp 00:02: [io 0x00e0-0x00ef]
pnp 00:02: [io 0x04d0-0x04d1]
pnp 00:02: [io 0x0800-0x087f]
system 00:02: [io 0x04d0-0x04d1] has been reserved
system 00:02: [io 0x0800-0x087f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: [io 0x0000-0x000f]
pnp 00:03: [io 0x0080-0x0090]
pnp 00:03: [io 0x0094-0x009f]
pnp 00:03: [io 0x00c0-0x00df]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: [io 0x0070-0x0073]
pnp 00:04: [irq 8]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [io 0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io 0x00f0-0x00ff]
pnp 00:06: [irq 13]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [io 0x03f8-0x03ff]
pnp 00:07: [irq 4]
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:08: [io 0x0378-0x037f]
pnp 00:08: [io 0x0778-0x077b]
pnp 00:08: [irq 7]
pnp 00:08: [dma 3]
pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active)
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
Switching to clocksource acpi_pm
pci 0000:00:04.0: BAR 6: assigned [mem 0x20000000-0x2001ffff pref]
pci 0000:00:0a.0: BAR 6: assigned [mem 0x20020000-0x2003ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:01.0: bridge window [mem 0xed000000-0xed0fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe7ffffff pref]
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 6 [mem 0x20000000-0xfcffffffff]
pci_bus 0000:01: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:01: resource 1 [mem 0xed000000-0xed0fffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xe7ffffff pref]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
audit: initializing netlink socket (disabled)
type=2000 audit(1361892249.388:1): initialized
Trying to unpack rootfs image as initramfs...
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 835
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [FUTS]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Fan [FAN] (on)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (40 C)
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
isapnp: Scanning for PnP cards...
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
agpgart-amd64 0000:00:00.0: AGP bridge [1039/0760]
agpgart-amd64 0000:00:00.0: AGP aperture is 64M @ 0xe8000000
brd: module loaded
loop: module loaded
pata_sis 0000:00:02.5: version 0.5.2
pata_sis 0000:00:02.5: SiS 962/963 MuTIOL IDE UDMA133 controller
scsi0 : pata_sis
scsi1 : pata_sis
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4000 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4008 irq 15
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:03.3: EHCI Host Controller
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:03.3: irq 23, io mem 0xed105000
ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.5.0-25-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:03.3
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:03.0: setting latency timer to 64
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.0: irq 20, io mem 0xed107000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 3.5.0-25-generic ohci_hcd
usb usb2: SerialNumber: 0000:00:03.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd 0000:00:03.1: setting latency timer to 64
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.1: irq 21, io mem 0xed108000
ata1.00: ATAPI: TSSTcorpCD/DVDW TS-H552B, HP08, max UDMA/33
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 3.5.0-25-generic ohci_hcd
usb usb3: SerialNumber: 0000:00:03.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:00:03.2: setting latency timer to 64
ohci_hcd 0000:00:03.2: OHCI Host Controller
ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:03.2: irq 22, io mem 0xed104000
ata1.00: configured for UDMA/33
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 3.5.0-25-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:03.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
isapnp: No Plug & Play device found
scsi 0:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-H552B HP08 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 1x/40x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, 242 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
EISA: Probing bus 0 at eisa.0
EISA: Cannot allocate resource for mainboard
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 5
Cannot allocate resource for EISA slot 6
Cannot allocate resource for EISA slot 7
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Freeing initrd memory: 14732k freed
Key type trusted registered
Key type encrypted registered
Magic number: 1:893:437
rtc_cmos 00:04: setting system clock to 2013-02-26 15:24:10 UTC (1361892250)
powernow-k8: Found 1 AMD Sempron(tm) Processor 3100+ (1 cpu cores) (version 2.20.00)
powernow-k8: no p states to transition
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 756k freed
Write protecting the kernel text: 5968k
Write protecting the kernel read-only data: 2428k
NX-protecting the kernel data: 4272k
udevd[87]: starting version 175
Refined TSC clocksource calibration: 1808.386 MHz.
Switching to clocksource tsc
skge: 1.14 addr 0xed100000 irq 18 chip Yukon rev 1
skge 0000:00:0a.0: eth0: addr 00:0f:3d:ef:6a:28
sis900.c: v1.08.10 Apr. 2 2006
0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
0000:00:04.0: Using transceiver found at address 1 as default
eth1: SiS 900 PCI Fast Ethernet at 0x0001a800, IRQ 19, 00:11:d8:a8:c0:c9
sata_sis 0000:00:05.0: version 1.0
sata_sis 0000:00:05.0: Detected SiS 180/181/964 chipset in SATA mode
scsi2 : sata_sis
scsi3 : sata_sis
ata3: SATA max UDMA/133 cmd 0xac00 ctl 0xb000 bmdma 0xbc00 irq 17
ata4: SATA max UDMA/133 cmd 0xb400 ctl 0xb800 bmdma 0xbc08 irq 17
firewire_ohci 0000:00:0b.0: added OHCI v1.0 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
usb 2-2: new low-speed USB device number 2 using ohci_hcd
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-7: SAMSUNG SP0812C, SU100-30, max UDMA7
ata3.00: 156368016 sectors, multi 16: LBA48
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA SAMSUNG SP0812C SU10 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 156368016 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: Attached scsi generic sg1 type 0
sda: sda1 sda2 < sda5 >
sd 2:0:0:0: [sda] Attached SCSI disk
usb 2-2: New USB device found, idVendor=049f, idProduct=0051
usb 2-2: New USB device strings: Mfr=1, Product=8, SerialNumber=0
usb 2-2: Product: Compaq USB Keyboard
usb 2-2: Manufacturer: CHICONY
firewire_core 0000:00:0b.0: created device fw0: GUID 0011d800001ad3f5, S400
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ata4: SATA link down (SStatus 0 SControl 300)
input: CHICONY Compaq USB Keyboard as /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.0/input/input3
hid-generic 0003:049F:0051.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY Compaq USB Keyboard] on usb-0000:00:03.0-2/input0
input: CHICONY Compaq USB Keyboard as /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.1/input/input4
hid-generic 0003:049F:0051.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [CHICONY Compaq USB Keyboard] on usb-0000:00:03.0-2/input1
usb 2-3: new full-speed USB device number 3 using ohci_hcd
usb 2-3: New USB device found, idVendor=058f, idProduct=9360
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3: Product: USB Reader
usb 2-3: Manufacturer:
usb 2-3: SerialNumber: 2004888
Initializing USB Mass Storage driver...
scsi4 : usb-storage 2-3:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
usb 4-1: new low-speed USB device number 2 using ohci_hcd
usb 4-1: New USB device found, idVendor=046d, idProduct=c016
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: Optical USB Mouse
usb 4-1: Manufacturer: Logitech
input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:03.2/usb4/4-1/4-1:1.0/input/input5
hid-generic 0003:046D:C016.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:03.2-1/input0
scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:1: Attached scsi generic sg3 type 0
sd 4:0:0:2: Attached scsi generic sg4 type 0
sd 4:0:0:3: Attached scsi generic sg5 type 0
sd 4:0:0:2: [sdd] Attached SCSI removable disk
sd 4:0:0:0: [sdb] Attached SCSI removable disk
sd 4:0:0:1: [sdc] Attached SCSI removable disk
sd 4:0:0:3: [sde] Attached SCSI removable disk
EXT4-fs (sda1): orphan cleanup on readonly fs
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3014771
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3408103
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3407936
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3407913
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3407908
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3407905
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3407902
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3407901
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3407900
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3407897
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3407891
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3407889
EXT4-fs (sda1): 12 orphan inodes deleted
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Adding 456700k swap on /dev/sda5. Priority:-1 extents:1 across:456700k
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
udevd[339]: starting version 175
lp: driver loaded but no devices found
parport_pc 00:08: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
lp0: using parport0 (interrupt-driven).
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ppdev: user-space parallel port driver
microcode: AMD CPU family 0xf not supported
intel8x0_measure_ac97_clock: measured 53800 usecs (2588 samples)
intel8x0: clocking to 48000
type=1400 audit(1361892261.286:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=509 comm="apparmor_parser"
type=1400 audit(1361892261.286:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=509 comm="apparmor_parser"
type=1400 audit(1361892261.286:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=509 comm="apparmor_parser"
type=1400 audit(1361892261.286:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=510 comm="apparmor_parser"
type=1400 audit(1361892261.286:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=510 comm="apparmor_parser"
type=1400 audit(1361892261.286:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=510 comm="apparmor_parser"
type=1400 audit(1361892261.286:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=511 comm="apparmor_parser"
type=1400 audit(1361892261.290:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=511 comm="apparmor_parser"
type=1400 audit(1361892261.290:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=511 comm="apparmor_parser"
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
skge 0000:00:0a.0: eth1: enabling interface
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xdcb00000, using 5120k, total 5120k
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
skge 0000:00:0a.0: eth1: Link is up at 100 Mbps, full duplex, flow control none
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
init: failsafe main process (642) killed by TERM signal
type=1400 audit(1361892267.546:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=802 comm="apparmor_parser"
type=1400 audit(1361892267.546:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=802 comm="apparmor_parser"
type=1400 audit(1361892267.546:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=802 comm="apparmor_parser"
type=1400 audit(1361892267.714:14): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=804 comm="apparmor_parser"
skge 0000:00:0a.0: eth1: disabling interface
skge 0000:00:0a.0: eth1: enabling interface
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
skge 0000:00:0a.0: eth1: Link is up at 100 Mbps, full duplex, flow control none
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
init: whoopsie main process ended, respawning
init: Disconnected from system bus
skge 0000:00:0a.0: eth1: disabling interface
skge 0000:00:0a.0: eth1: enabling interface
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
skge 0000:00:0a.0: eth1: Link is up at 100 Mbps, full duplex, flow control none
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
skge 0000:00:0a.0: eth1: disabling interface
skge 0000:00:0a.0: eth1: enabling interface
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
skge 0000:00:0a.0: eth1: Link is up at 100 Mbps, full duplex, flow control none
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
skge 0000:00:0a.0: eth1: disabling interface
skge 0000:00:0a.0: eth1: enabling interface
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
skge 0000:00:0a.0: eth1: Link is up at 100 Mbps, full duplex, flow control none
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
init: tty1 main process ended, respawning
EXT4-fs (sda1): Unaligned AIO/DIO on inode 2098740 by fio; performance will be poor.
EXT4-fs (sda1): Unaligned AIO/DIO on inode 2098740 by fio; performance will be poor.
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
JFS: nTxBlock = 3464, nTxLock = 27714
NTFS driver 2.1.30 [Flags: R/O MODULE].
QNX4 filesystem 0.2.3 registered.
Btrfs loaded